News

Learn how to make natural flour-based paint for wood

Wheat paint, Swedish paint, ocher paint or flour paint. All these names are used to define an exterior paint that is non-toxic and, in addition, is resistant on vertical wooden surfaces. This is made with very simple ingredients and can even be prepared at home. Learn here to make natural paint for wood based on flour.

How to make natural flour-based wood paint

Knowing how to make natural flour-based paint for wood will only bring you advantages. On the one hand, in terms of quality/price it is quite affordable. At the same time, It is a type of paint that can be used both indoors and outdoors. since it resists in both environments.

On the other hand, you don’t need a lot of maintenance. Is cleans up easily with soapy water. When repainting to give a new look to the appearance, it is not necessary to sand the surface, just clean it and paint directly.

When it comes to the useful life of the paint, this is between eight and 10 years.

It should be noted that this painting is colored with natural earth, as is the case with ocher. Hence it is also called ocher paint. Iron oxides and other pigments can also be used to color it.

Ingredients

With the quantities that are exposed, to follow, you will be able to obtain 10 liters of homemade paint. With this you can paint a surface of about 35 square meters per layer.

See also  How to remove bleach stains from fabrics: tips and tricks

With that said, write it all down to learn how to make natural flour-based wood paint.

  • Agua: 8 liters;
  • Linseed oil: 1 liter;
  • White flour: 650 grams;
  • Black soap or dish soap: 100 ml.;
  • Earth coloring or iron oxides: 2.5 kg.

preparation mode

1. First, bring seven liters of water to a boil in a large container.

2. Now dilute the flour in a liter of water. Add the mixture to the pot with boiling water and cook for 15 minutes over medium heat. Stir with a wooden spoon.

3. Next, add the pigments and continue mixing for another 15 minutes.

4. Later, add the linseed oil and mix for 15 more minutes.

5. Now, pour in the liquid soap, mix, and turn off the heat. Let it cool.

After these steps, you will be able to use the paint. In the event that it is very thick or viscous, dilute it with a little water until it is the viscosity you want.

How to apply it

It is important that you do not apply it in the sun or on wood that is very wet. The temperature must exceed 5ºC.

If the wood is new, it is best to use a primer. To do this, dilute the paint with 15 to 25% water.

Use a brush to work the paint into the wood. Put on an even first coat. After less than 60 minutes, the paint will be dry.

Wait at least 24 hours before applying the second and final coat.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button