What to do in case of clogging? What products to use to free the drain pipes without damaging them? Here are three methods recommended by plumbers
Baking soda and vinegar
Baking soda and white vinegar for clogged drains. It is recommended to prepare a mixture of 80 grams of baking soda and 80 grams of White vinegar in a bowl. Once combined, you will notice that the mixture will begin to sizzle. Here, at this point it must be immediately poured into the drain and the “sparkling” action will help to break down the dirt. After about an hour, you can rinse it off with warm water. You can also pour some baking soda down the drain and then moisten it with white vinegar.
It is recommended to wear gloves and mix 120 grams of borax with 480 grams of boiling water. Then the mixture is poured into the drain and you have to wait 15 minutes. Afterwards it is recommended to rinse with hot water.
While borax works wonders on drains, extra care must be taken while using this household cleaner as it can be toxic and irritating to the skin and eyes and, if inhaled, can cause nausea, vomiting, and difficulty breathing. Also, in the case of PVC pipes or a porcelain sink, it is advisable to avoid pouring boiling water down the drain as it could cause damage.
Of course, the plunger can also help unclog a drain. It is therefore advisable to fill the sink with a few centimeters of water and to slide the plunger up and down the drain several times. When you pull the plunger out of the drain opening, the force should lift anything that was obstructing it.